Product features

• ? 7-inch touch screen operation;
  
• ? Support multi language, convenient for different users;
  
• ? Built in environment automatic detection program, automatically detect the test environment and remind users;
  
• ? Programmable operation, realizing the setting function with one key;
  
• ? Built in international standard grade parameters, easy and fast operation;
  
• ? The discharge module can be easily replaced to meet the test requirements of different standards;

Product parameters

• Product model
  

  output voltage
  

  Output voltage polarity
  

  Energy storage capacitance
  

  Discharge resistance
  

  Rise time of discharge current
  

  Air discharge holding time
  

  Discharge mode
  

  Discharge mode
  

  Trigger mode
  

  Working mode
  

  Discharge interval
  

  Discharge times
  

  Equipment working power supply
  

  ambient temperature

• ESD 30K
  

  0.2~±30kV
  

  Positive, negative, positive before negative, negative before positive
  

  150pF
  

  three thousand three hundred and two
  

  0.6~1ns
  

  z5s
  

  Contact discharge, air discharge
  

  Single discharge, continuous discharge
  

  Automatic, manual and gun body control
  

  IEC level mode, programming mode, voltage ramp up mode
  

  0.05~9.99s
  

  1~9999
  

  AC220V ± 10%,50/60Hz
  

  15C~35 ℃

Product recommendation

Single Phase 10A Voltage Dips Generator

Model：VDT S10

Voltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or interruptions. Voltage changes are caused by continuous changes in the loads connected to the grid. If the EUT cannot respond in time to changes in the power supply voltage, it may cause malfunctions. Voltage dips generators are used to evaluate the performance of electrical and electronic equipment when subjected to voltage dips/sags, short interruptions, and voltage changes. Products fully meet the requirements of standards IEC/EN 61000-4-11 and GB/T17626.11.

Learn more

Aircraft surge voltage generator GJB 181b

Model：GJB 181B

The aircraft surge voltage generator GJB 181b is designed in accordance with the relevant requirements of GJB 181 standard, and is used to simulate the changes of high-voltage, normal and low-voltage power supply characteristics of aircraft electronic equipment power supply, as well as the status of undervoltage surge, overvoltage surge and instantaneous power failure to provide an evaluation basis.

Learn more

Impulse current generator sur 6ka

Model：SUR 6KA

The lightning surge generator sur 6ka is used to inspect the anti surge protection devices such as zinc oxide arrester valve piece, varistor, SPD, TVs tube, gas discharge tube, etc. for surge impact test. The product produces 8/20us surge pulse waveform, and the technical indicators of the waveform comply with the provisions of national standards and IEC standards.

Learn more